O-Ring Size Charts

Every standard we quote has its own size list, and each list can be searched by code or by measured size. Start with the one your drawing names.

  • AS568 O-ring size chart
    350 dash numbers, from -001 at 0.029 in to -475 at 25.94 in. ISO 3601 Class A uses these same numbers, so one chart covers both.
  • ISO 3601 O-ring size chart
    Class A and Class B. Class B is the metric list, with five cord groups from 1.80 to 7.00 mm and codes such as C0250.
  • JIS B 2401 O-ring size chart
    Five series: P, G, S, SS and V. The number in a JIS code is a nominal figure, not the measured inside diameter.
  • BS 1806 O-ring size chart
    334 British numbers, from 001 to 460, with the inch dimensions and their millimetre equivalents.
  • Bonded seal size chart
    Metric 201 to 255 and imperial 001 to 039, with the four dimensions that define a bonded seal.
  • O-ring groove dimensions
    Gland depth, groove width and the squeeze band for each cross section, with a checker that reads a groove you have already measured.

If your drawing carries no standard number at all, send the inside diameter, the cord and the groove dimensions. We will place the ring from those, and tell you whether it is a standard size or needs a mould.

Ask About A Size

滚动至顶部