What’s Jaw & Spider coupling?
Jaw & Spider (or Jaw-Type) couplings are a common type of shaft coupling in the industry. They are designed to transmit torque and rotation between two shafts, accept shaft misalignment, and help protect components from damage by damping shock and vibrations. Jaw-type couplings feature two aluminum alloy hubs with protruding lugs known as “jaws,” and a polyurethane elastomer insert known as a “spider” that fits between the hubs. It’s used for a variety of heavy machinery and equipment coupling drive shafts as a buffer. It is also called shaft coupling, spider coupling. The material can be divided into polyurethane coupling and rubber coupling, nylon coupling.
The Classification of Jaw & Spider couplings:
It is divided into MT type, T type, GR type, HRC type, NM type elastic ring, L type hexagonal pad, NL nylon inner gear sleeve, H type elastic block, rubber gear, etc.
Features of Jaw & Spider couplings:
Jaw & Spider couplings are used in the middle of the coupling to play the role of shock absorption, insulation, buffer transmission torque. The transmission torque will be different according to its materials and hardness. The higher the hardness is, the transmission torque will be greater.
Shaft coupling within the rubber block we generally called Jaw & Spider couplings. It is divided into three kinds of materials, rubber, polyurethane, nylon. Rubber, polyurethane is more widely used.
The cushioning of rubber couplings cushioning good, but the strength is low, the load-bearing capacity is small, the resistance to high and low temperatures and oil resistance is poor. It is easy to age, and the use and storage period is short.
So we prefer polyurethane material spider couplings. Polyurethane elastomer spiders offer a high load capacity while maintaining a damping effect on vibration and thermal conductivity. The elastomer material provides good resistance to oils and chemicals, as well as electric isolation between both shafts.
Our couplings have different torque ratings and performance levels determined by the hardness (durometer) of the elastomer spider, making them adaptable for a wide range of mechanical applications. The profile of the jaw and the spider will also impact performance. We offer a Curved-Jaw profile for zero-backlash and high torsional stiffness for high performance in servo and stepper motor-driven applications. A more cost-effective Straight-Jaw type is also available for less exacting requirements.
Spider Element Hardness and What It Changes
The spider is the part that wears, so the compound matters as much as the hub. Harder elements carry more torque with less deflection. Softer elements damp vibration and accept more misalignment, but they run hotter once the torque climbs. The usual failure tells you which way to move: a spider torn through the lobe was too soft for the load, while a spider that hardened and cracked ran too hot, often from chronic misalignment.
| Spider grade | Torque capacity | Vibration damping | Misalignment tolerance | Typical drive |
|---|---|---|---|---|
| Soft, around 80 Shore A | Lower | Highest | Widest | Pumps, fans and motors with noticeable vibration |
| Medium, around 92 Shore A | Moderate | Good | Good | General industrial, conveyor and mixer drives |
| Hard, around 95 to 98 Shore A | Highest | Lower | Narrowest | High torque drives and servo or stepper positioning |
These grades are a rule of thumb. The final choice follows the torque, speed and real misalignment of the drive, so send those figures with the enquiry rather than ordering by hardness alone.
What to Send Us for a Quotation
- Coupling size or hub model, or the spider dimensions if the marking is gone
- Motor power, speed and torque requirement
- Shaft diameters on both sides
- Quantity and repeat demand
We supply hubs and spiders in the common L, NM and FCL series, so a replacement spider can be matched to the coupling already on the machine. The jaw couplings and replacement spiders page lists what we hold, and the role of the flexible coupling covers where a coupling is the right answer at all.



